XE910-4G

0 out of 5

• Power Socket (PWR, GND, RESET)

• D-Type 9-Pin RS232 Connector

• Mini USB Connector (ESD protection for USB 2.0)

• 2×4 GPIO Socket

– RS485 – Transceiver with AutoDirection Control

– 2 Output – 2 Input – 1 Analog Input

• Cellular Antenna Connector (SMA-F 50Ohm)

• Rx Diversity Antenna Connector (SMA-F 50Ohm)

• On board Push-Push Sim Card Holder

• 2 operating status LED’s (Power / Status)

Açıklama

Interfaces Electrical & Sensitivity
Power Socket (PWR, GND, RESET) Supply voltage: 9–35VDC @ 1.2A min
D-Type 9-Pin RS232 Connector Battery: Li-Ion 3.7V 960mAh (Optional)
(RS-232 transceivers with integrated ESD protection) Output power
Mini USB Connector (ESD protection for USB 2.0 interfaces) Class 4 (2 W, 33 dBm) @ GSM 850/900
2×4 GPIO Socket Class 1 (1 W, 30 dBm) @ GSM 1800/1900
RS485 – Transceiver with AutoDirection Control Class E2 (0.5 W, 27 dBm)@ EDGE 850/900
2 Output (Relay Driver Max 12V @ 150mA) Class E2 (0.4 W, 26 dBm)@ EDGE 1800/1900
2 Input (Optical isolator 9-24V DC) Class 3 (0.25 W, 24 dBm) @ UMTS
1 Analog Input (0-5V DC) Class 3 (0.2 W, 23 dBm) @ LTE
Cellular Antenna Connector (SMA-F 50Ohm) Cellular Sensitivity
Rx Diversity Antenna Connector (SMA-F 50Ohm) 111 dBm @ UMTS
On board Push-Push Sim Card Holder 109 dBm @ GSM 850/900 MHz
2 operating status LED’s 110 dBm @ DCS1800/PCS1900 MHz
Power / Status
Software
Cellular Features AppZone application resources
4G bands (MHz) Programming language: C
B1(2100),B3(1800),B7(2600),B8(900),B20(800) IDE: Eclipse
3G bands (MHz) Dedicated File System: 5 MB
B2(2100),B8(900) Separate App. RAM Space: 2 MB
2G bands (MHz)
B3(1800),B8(900) Data
LTE FDD Cat.4, 3GPP release 9 compliant LTE
SIM application Tool Kit 3GPP TS 51.014 Uplink up to 50 Mbps
Serial port multiplexer 3GPP TS27.010 Downlink up to 100 Mbps
SMS over IMS HSPA+
Builtin UDP/TCP/FTP/SMTP stack Uplink up to 5.76 Mbps
Control via AT commands according to Downlink up to 42.0 Mbps
3GPP TS27.005, 27.007 and customized UMTS
Telit AT commands Uplink/Downlink up to 384 kbps
Rx Diversity and MIMO DL 2×2
Voice and SMS Mechanical / Environmental
Standard and extended AT command set Dimensions 85 x 80 x 30 mm
IP stack with TCP and UDP protocol Weight: 140 grams (with battery)
Extended temperature range:
-40°C to +85°C (Operational)