| Interfaces |
Electrical & Sensitivity |
| • |
Power Socket (PWR, GND, RESET, ON/OFF) |
• |
Supply voltage: 5-28 VDC @ 10W |
| • |
D-Type 9-Pin RS232 Connector |
• |
Battery: Li-Ion 18650 3.7V 3400mAh |
| • |
Mini USB Connector (USB 2.0 FS Device Mode) |
• |
Hardware Watchdog: 29 seconds timeout |
| • |
GPIO Socket |
• |
Builtin 3.20v power on reset |
| – |
RS485 (with fail-safe resistors) |
• |
Output power |
| – |
4 Output (Relay Driver Max 60V @ 150mA) |
– |
Class 4 (2 W, 33 dBm) @ GSM 850/900 |
| – |
4 Input (3-250V DC/AC) |
– |
Class 1 (1 W, 30 dBm) @ GSM 1800/1900 |
| – |
1 Analog Input (0-12V DC) |
– |
Class E2 (0.5 W, 27 dBm)@ EDGE 850/900 |
| – |
Reset Signal |
– |
Class E2 (0.4 W, 26 dBm)@ EDGE 1800/1900 |
| • |
Main Power Switch |
– |
Class 3 (0.25 W, 24 dBm) @ UMTS |
| • |
Cellular Antenna Connector (SMA-F 50Ohm) |
– |
Class 3 (0.2 W, 23 dBm) @ LTE |
| • |
Rx Diversity Antenna Connector (SMA-F 50Ohm) |
• |
Cellular Sensitivity |
| • |
GNSS Active Antenna Connector (SMA-F 50Ohm) |
– |
111 dBm @ UMTS |
| • |
1.8V/3.0V Sim Interfaces |
– |
109 dBm @ GSM 850/900 MHz |
| • |
Dual Nano (4FF) Push-Push Sim Card Holder |
– |
110 dBm @ DCS1800/PCS1900 MHz |
| • |
Dual Sim Chip (eSim, MFF2) on PCB (optional) |
• |
GNSS Sensitivity |
| • |
4 Led |
– |
Acquisition: -148 dBm |
| – |
External Power Status |
– |
Navigation: -163 dBm |
| – |
Charge Status |
– |
Tracking: -165 dBm |
| – |
GNSS Status (PPS Signal) |
• |
Positional Accuracy (CEP50): |
| – |
User/Network Status |
– |
Autonomous Positional Error ‹ 2.5 m |
| |
|
• |
Accuracy |
| Cellular Features |
– |
Speed: ‹ 0.01 m/s |
| • |
LTE FDD Cat.4, 3GPP release 9 compliant |
– |
Heading: ‹ 0.01 deg |
| • |
SIM application Tool Kit 3GPP TS 51.014 |
• |
Time To First Fix (90% @ -130 dBm) |
| • |
Serial port multiplexer 3GPP TS27.010 |
– |
Hot Start: 1 s |
| • |
SMS over IMS |
– |
Cold Start: ‹ 35 s |
| • |
Builtin UDP/TCP/FTP/SMTP stack |
|
|
| • |
Control via AT commands according to |
Software |
| |
3GPP TS27.005, 27.007 and customized |
• |
Python* versiyon: 2.7.2 application resources |
| |
Telit AT commands |
• |
Python* script interpreter |
| • |
Rx Diversity and MIMO DL 2×2 |
|
(module takes the application code |
| • |
Voice and SMS |
|
directly in the Python* language) |
| • |
Standard and extended AT command set |
• |
Memory: 2 MB of NV memory for the |
| • |
IP stack with TCP and UDP protocol |
|
user scripts and 2 MB RAM for the |
| |
|
|
Python* engine usage |
| Data |
|
AppZone application resources |
| |
LTE |
• |
Programming language: C |
| • |
Uplink up to 50 Mbps |
• |
IDE: Eclipse |
| • |
Downlink up to 100 Mbps |
• |
Dedicated File System: 5 MB |
| |
HSPA+ |
• |
Separate App. RAM Space: 2 MB |
| • |
Uplink up to 5.76 Mbps |
|
|
| • |
Downlink up to 42.0 Mbps |
Mechanical / Environmental |
| |
UMTS |
• |
Dimensions 110 x 130 x 30 mm |
| • |
Uplink/Downlink up to 384 kbps |
• |
Weight: 200 grams (with battery) |
| |
|
• |
Extended temperature range: |
| |
|
|
-40°C to +85°C (Operational) |
